Tips on how to Setup Management Sticks and Switches within the Mixes Web page on EdgeTX

When you’re utilizing EdgeTX, establishing management sticks and switches on the Mixes web page is crucial for flying your FPV drone. Whether or not you’re configuring the sticks for fundamental flight management or establishing switches for arming, flight modes, or different capabilities, this information will stroll you thru the method step-by-step.

A few of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) when you make a purchase order after clicking on considered one of these affiliate hyperlinks. This helps help the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra info.

By the top of this tutorial, you’ll know methods to assign your management sticks to channels, arrange switches for various actions like arming or flight mode adjustments, and check the setup to verify every little thing is working accurately.

Take a look at my different EdgeTX associated posts: https://oscarliang.com/tag/edgetx/

Entry the Mixes Web page

To start, you’ll have to open the Mixes web page in your EdgeTX radio. That is the place you’ll map your management sticks and switches to varied channels that your flight controller makes use of.

1. Flip in your EdgeTX radio.
2. From the Residence display, press the Mannequin button.
3. Navigate to the Mixes tab by both urgent the Web page button till you discover it or deciding on it from the menu when you’re on a touchscreen radio.

Right here, you’ll discover a record of channels (e.g., CH1, CH2, CH3, and many others.). Every channel could be mapped to a selected enter, like a stick or swap.

Assign Management Sticks to Channels

For many fashions, the primary 4 channels (CH1 to CH4) are sometimes assigned to the primary controls: roll, pitch, throttle, and yaw. For instance:

• Channel 1: Roll (Aileron)
• Channel 2: Pitch (Elevator)
• Channel 3: Yaw (Rudder)
• Channel 4: Throttle

Normally, this must be mechanically configured for you if you create a brand new mannequin, but when not, you are able to do it your self:

1. Channel 1 (Roll):
   • Spotlight CH1 utilizing the jog wheel and press to enter the setup.
   • Set the Supply to your aileron stick.
   • Optionally, you may regulate Weight (how a lot of the stick motion is handed by way of to the output) or apply Expo for smoother management.
2. Channel 2 (Pitch):
   • Spotlight CH2.
   • Set the Supply to the elevator stick.
3. Channel 3 (Throttle):
   • Spotlight CH3.
   • Set the Supply to the throttle stick.
4. Channel 4 (Yaw):
   • Spotlight CH4.
   • Set the Supply to the rudder stick.

Setup Switches

Now that your management sticks are configured, it’s time to assign capabilities to your switches. These switches can be utilized for numerous duties like arming, altering flight modes, or activating options like a buzzer or GPS rescue.

Setting Up an Arm Change

In ExpressLRS, it’s really useful to make use of Channel 5 (CH5) for the Arm swap. Right here’s methods to set it up:

1. Spotlight CH5 within the Mixes web page.
2. Press the jog wheel to enter the combo setup.
3. Scroll to Supply and flip the swap you wish to use for arming (e.g., SD). The swap you flip will mechanically seem because the supply, so that you don’t have to manually search by way of a listing.
4. Depart the remaining settings at their default values.

Setting Up a Mode Change

For configuring flight modes (e.g., Acro Mode, Angle Mode, Horizon Mode), you’ll sometimes use a 3-position swap. Let’s use CH6 for this instance.

1. Spotlight CH6 within the Mixes web page.
2. Assign a 3-position swap (e.g., SC) to manage the totally different flight modes.

How Many Switches Can You Set Up?

Most radios include extra switches than you’ll ever want. When you can assign all of them to the accessible channels, it’s often not needed. For many FPV drone setups, you’ll solely want a couple of switches.

The variety of channels accessible is determined by your radio hyperlink. In ExpressLRS, you may have 8 to 16 channels based mostly on the swap mode. The default setup for many FPV drones permits for 12 channels, with 8 channels accessible for switches after the primary 4 are used for management sticks.

How Many Switches Do You Actually Want?

For many FPV drones, I sometimes use 3-4 switches:

• Arm swap: To arm/disarm the drone.
• Buzzer swap: To find the drone when misplaced.
• Flight mode swap: To toggle between Acro, Angle, or Horizon modes.
• GPS Rescue Mode swap (if relevant): To allow GPS Rescue in case of sign loss.

Check Your Setup

As soon as your sticks and switches are mapped, it’s vital to check them:

1. Join your drone and open the Receiver tab in Betaflight (or your flight controller’s configuration device).
2. Transfer the sticks and flip the switches to see if the corresponding channels are responding accurately. In case your drone must be powered for this step, take away the propellers earlier than connecting the battery for security.

Now you may transfer on to assigning capabilities to these auxiliary channels you simply setup in Betaflight modes

Conclusion

Organising management sticks and switches within the Mixes web page of your EdgeTX radio is a key step in configuring your FPV drone for easy, responsive management. Whether or not you’re assigning management sticks to fundamental capabilities or configuring switches for arming and flight modes, following these steps will make sure that every little thing is mapped accurately and prepared for flight.

Edit Historical past

• Sep 2018 – tutorial created
• Sep 2019 – up to date
• Oct 2024 – up to date for EdgeTX and ExpressLRS