7.3 C
United States of America
Saturday, November 23, 2024

Overview: Sub250 OasisFly25 2.5-Inch FPV Drone – DJI O3 Geared up and Matches in Your Pocket


The OasisFly25 from Sub250 is an thrilling 2.5-inch FPV drone, outfitted with the DJI O3 air unit and weighing below 250g, making it excellent for compact, freestyle flying. This drone is sufficiently small to slot in your pocket but packs loads of energy. It’s designed for individuals who love the joys of freestyle flying in tight areas or parks. On this assessment, I’ll stroll you thru my expertise with the OasisFly25, together with its specs, efficiency, flight traits, and whether or not it lives as much as the hype.

A number of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) in case you make a purchase order after clicking on one in every of these affiliate hyperlinks. This helps assist the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra data.

The place to Purchase

You should buy the OasisFly25 from these distributors:

The drone is obtainable with the DJI O3 system and a receiver put in, however there’s additionally a plug-and-play model if you wish to use a special FPV system and receiver.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Unbox Accessories

Contained in the field, you’ll discover the drone and two accent bins containing:

  • Two units of HQ 2.5×2.5×3 tri-bladed propellers
  • Stickers and manuals
  • Spare screws, standoffs, and a hex key
  • 3D-printed digital camera holders (together with one for a unadorned GoPro)
  • USB-C adapter for the flight controller

Be aware that batteries are bought individually: https://oscarliang.com/product-fmf7

Spare propellers: https://s.click on.aliexpress.com/e/_Dkaokyp

Specs

  • Flight controller: F7 with 35A ESC, which is spectacular for a 2.5-inch drone
  • Body: Sub250 Oasis Body, 135mm wheelbase, with 2mm prime plate and a pair of.5mm backside and arm thickness
  • Flight controller: Redfox A3 F722 45A AIO
  • Digital camera/VTX/Antenna: DJI O3 Air Unit
  • Motors: Sub250 1404 4500kv
  • Propellers: HQ2.5×2.5×3
  • Receiver choices: PNP, TBS Crossfire Nano, ELRS 2.4G
  • Battery connector: XT30
  • Beneficial battery: 4S 530-730mAh LiPo (not included)
  • Weight: 174g (with out battery), 241g with 4S 720mAh

Construct High quality and Design

The OasisFly25 boasts a glossy and sturdy design, combining carbon fiber and CNC aluminum for power and stability. The straightforward, efficient design means it’s straightforward to take aside when it’s essential to restore it. The body options replaceable arms, permitting you to swap out damaged arms without having to switch the whole body. Spare body elements can be found on the Sub250 web site.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Antenna Mount Rear

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Fc Inside Frame Capacitor

Weighing 174g with out a battery and 241g with a 720mAh 4S pack, the drone is probably somewhat heavy for a 2.5″ drone, however the construct may be very sturdy. The DJI O3 system supplies a top-notch video feed, making this an important drone for recording high-quality footage.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Bottom

The lengthy body physique design means the propellers aren’t seen within the FPV digital camera’s view, so it doesn’t damage your shot which is nice. There’s sufficient room so that you can place a secondary digital camera like a bare GoPro if you want.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Side

One minor draw back is the absence of a USB port on the flight controller, requiring a particular dongle to configure Betaflight. Whereas not a deal-breaker, it provides some inconvenience if it’s essential to make frequent adjustments.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Usb Adapter

The OasisFly25 body can even accommodate the Walksnail Moonlight Digital camera and an analog setup, including versatility.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Motor

The OasisFly25 has a strong building and it could possibly take a beating, however I’d nonetheless advocate getting further props and arms simply in case. I had a number of crashes throughout testing, and the drone held up effectively, with solely minor scratches on the motors and body. The 3D-printed motor protectors additionally did their job, absorbing affect and conserving the motors in fine condition.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Flight Controller Soldering

Flight Efficiency

Now, let’s discuss the way it flies.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3

Utilizing the advisable 4S 720mAh LiHV battery brings the entire weight to 241g, which is barely heavy for a 2.5″ FPV drone. This setup gained’t go away room for a unadorned GoPro if you wish to keep below 250g, however the drone nonetheless performs extremely effectively.

Proper from the primary takeoff, I used to be impressed by the drone’s energy. Regardless of its small measurement, it gives wonderful acceleration and stability, even in very windy situations. It hovers effortlessly at 25% throttle, and with just a bit throttle punch, it shoots up like a rocket. I used to be flying in 23MPH wind, the drone nonetheless felt locked in and steady, with little or no propwash throughout aggressive maneuvers, and it wasn’t overly noisy.

Though the additional weight lowered some effectivity, the drone nonetheless dealt with effectively, providing about 5 minutes of aggressive flying. In the event you’re cruising, you may stretch the flight time to over 7 minutes. The OasisFly25 strikes a very good stability between agility and effectivity.

With no propellers in view, you may seize clear footage whether or not you’re flying slowly or quick. The antenna efficiency was wonderful, sustaining a robust sign all through my flights.

That is most likely top-of-the-line 2.5″ quads with the DJI O3 I’ve flown for freestyle. It has that “flingability” you get from bigger quads like a 5″, probably as a result of its heavier weight. It’s obtained the punch to throw round simply within the air, and inverted strikes and dives are clear and clean, with out the uncontrollable washout seen in lighter micros. These qualities are key for a very good freestyle quad. Whereas it’s not as highly effective as a 5″, it’s nonetheless responsive, punchy, and agile. Importantly, it’s quiet, so it gained’t disturb folks close by.

When flying in tighter areas just like the woods, I used to be largely working between the 20% to 30% throttle vary, just like a 5″, but it surely was a lot simpler to maneuver as a result of its lighter weight and nimbleness in comparison with a bigger quad.

I additionally examined smaller batteries, like a 4S 450mAh, however the flight time was nearly halved in comparison with the 720mAh. Whereas the lighter weight did enhance flight efficiency, the lowered flight time didn’t justify the trade-off for my part. I’d advocate sticking with the 4S 720mAh from Sub250 for the very best general efficiency: https://oscarliang.com/product-fmf7

What Might Be Improved

I don’t a lot a lot damaging to say in regards to the Oasisfly25, fairly pleased about its design and efficiency actually. The one factor is weight.

The body’s sturdiness provides further weight, and whereas this contributes to its sturdiness, I’d have most popular a lighter construct for higher effectivity and agility. Nonetheless, the trade-off for sturdiness is comprehensible.

You’ll be able to scale back weight by eradicating the 3D-printed ft or utilizing the Flywoo O3 bare package to make the DJI O3 Air Unit 15+ grams lighter. Changing the unique O3 antenna with light-weight dipole antennas can even shave off a number of grams, which is an inexpensive alternative for many customers who gained’t be flying lengthy vary with this mannequin.

One other minor suggestion: making the battery lead barely longer would scale back stress on the solder joints.

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Lipo Battery Xt30

Lastly, I’d like to see a bit extra safety for the DJI O3 digital camera, a small protruded 3D printed piece hooked up to the entrance of the underside plate would do a very good job. For now I believe it’s essential to make use of an ND filter, or only a clear UV filter to guard the lens from scratching: https://oscarliang.com/flywoo-nd-filter-o3/

Sub250 Oasisfly25 2.5 Inch Fpv Drone Dji O3 Camera

The right way to Setup

The flight controller comes pre-installed with Betaflight 4.4.3 (firmware goal: SUB250REDFOXF722AIO). The ESC comes with BLHeli_32 firmware 32.9.

To arrange this drone for first flight, here’s what I did:

Binding ELRS Receiver

  1. The ExpressLRS receiver comes with ELRS 3.3.1 firmware, with the goal Sub250 2400 RX.
  2. Energy the receiver (through battery or USB) and watch for it to enter WiFi mode (indicated by a quickly flashing LED).
  3. Connect with the ExpressLRS receiver’s WiFi community in your cellphone, open browser and go to 10.0.0.1, and enter your binding phrase.
  4. Observe different binding strategies, see my detailed directions right here: https://oscarliang.com/bind-expresslrs-receivers/.

Binding DJI O3 Air Unit

Betaflight Setup

  1. Set your personal charges.
  2. Configure switches for arm, angle, beeper, and turtle mode.

That’s it!

Last Ideas: Is the Sub250 OasisFly25 Value It?

Completely! The Sub250 OasisFly25 FPV drone gives unbelievable efficiency in a compact, sturdy design. It’s quick, responsive, and excels at freestyle flying. Though it’s barely heavier than splendid, the sheer enjoyable and flexibility it supplies make up for the added weight.

For $396 with the DJI O3 system, the OasisFly25 is well-priced and ideal for each rookies and skilled pilots in search of a transportable, sub-250g freestyle drone. You should buy the OasisFly25 from these distributors:

In the event you’re available in the market for a robust and compact freestyle drone, the OasisFly25 is a strong alternative that gained’t disappoint.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles